Cel-Fi GO X
The evolved smart signal booster that can amplify cellular signals up to 100 dB.
Up to 100 dB max gain
Indoor / outdoor protection
(NEMA 4 rated)

The Cel-Fi GO has a rugged design to withstand harsh conditions including dust and water exposure. Cel-Fi GO utilizes nanotechnology to produce a thin film coating across the entire PCB assembly. This coating, combined with an industrial design for harsh conditions, enables the device to support weather conditions that include water, dust, and dirt.

Multi-Band Cel-Fi GO X

The Cel-Fi GO X Smart Signal Booster, the first carrier-class indoor/outdoor cellular coverage solution to feature industry leading 100 dB system gain and Nextivity’s unconditionally network safe guarantee. Cel-Fi GO X leverages the award-winning Intelliboost signal processing to deliver the industry’s largest coverage footprint with the best voice and data wireless performance. Cel-Fi GO X is NEMA 4 rated weather resistant and does not interfere with other wireless devices.

This multi-carrier solution is ideal for use in commercial properties, government buildings, agricultural settings, small manufacturing operations, rural areas, businesses, and large homes.

  • 3G / 4G / LTE Voice and Data
  • Up to 15,000 ft2 (1,500 m2) of Coverage
  • Multi-Carrier Support with Carrier Switching
  • Indoor / Outdoor NEMA 4 Rated
  • Network Safe

Get setup in 5 easy steps

Step 1

Install Donor Antenna

Step 2

Install Server Antenna

Step 3

Mount the GO near power outlet

Step 4

Connect Donor & Server Antennas to GO unit

Step 5

Plug in the Cel-Fi GO

Sample Layouts

One Level

Two Level



Remotely Managed Outdoor Equipment

The Cel-Fi GO RMOE is a remotely managed cellular repeater solution that leverages the Cel‑Fi GO combined with a cellular modem to establish an Internet connection to Cel-Fi’s WAVE Portal management platform. The product is designed to extend the cellular network to remote and rugged locations that are not readily accessible to service technicians, or any area where remote management is desired.

Antenna Options

Cel-Fi Wideband Directional Antenna

The Cel-Fi Wideband Directional Antenna is an outdoor vertically polarized highly directional antenna for Cellular Boosters; with 10 dB gain in the low bands and 11 dB gain in the high bands.  The weather resistant housing is built with UV stabilized ABS plastic casing. Optimized for Cel-Fi products, the Cel-Fi Wideband Directional Antenna can be used with the Cel-Fi WAVE Antenna positioning app. The unit includes standard brackets for mounting, and can also be used with the Cel-Fi Pole Mount.

Cel-Fi Wideband Panel Antenna

The Cel-Fi Wideband Panel Antenna is an indoor/outdoor cellular wideband directional antenna with 6 dB gain in the low bands and 10 dB gain in the high bands. The weather resistant housing is built with UV stabilized ABS plastic. Optimized for Cel-Fi products, the Cel-Fi Wideband Panel Antenna can be used with the Cel-Fi WAVE Antenna positioning app. The unit includes standard brackets for wall mounting, or can be used with any Cel-Fi Mount.

Cel-Fi Whip Antenna

The Cel-Fi Whip Antenna is designed to distribute enhanced cellular signal from cellular boosters in indoor or outdoor applications. With a standard SMA connector, and right-angle pivoting joint, the Cel-Fi Whip Antenna can be used with Cel-Fi GO, PRO, or DUO.

Cel-Fi Indoor Omni Antenna

The Indoor Omni Antenna receives and transmits signal in a 360° pattern and are compatible with the 698 – 2700 MHz frequency ranges that include 3G and 4G signals. They come with an SMA Male Connector.

  • 3G/4G/LTE wideband cellular antenna
  • SMA Male connector
  • Omni-directional

Cel-Fi LPDA Antenna

The Cel-Fi LPDA Antenna offers a powerful 12 or 14dBi gain (depending on carrier frequency) over 698-2700 MHz and is designed to reduce out of band noise, to improve SiNR and overall signal quality. Mounting is made simple with a mast down-tilt bracket and U-Bolts. This enables you to mount the antenna on a flat surface or a pole. A 45 degree mount attachment enables the antenna to be mounted at a tilt, for optimal matching of macro donor signals.

Tech Specs


Band 2/4/5/12/13
Band 1/3/5/7/8/20

6 front-end receivers that relays 2 bands concurrently.

Physical Specification

272.5mm x 96.5mm x 43.25mm

System Gain

Up to 100 dB Gain

Model Numbers


Antenna Model Numbers

A41-V21-100, Mag mount
A41-V36-100, Screw Mount
A52-V32-100, Wideband Panel Antenna, frequency range 698-2700 MHZ
A32-V24-100, Wideband Directional Antenna, frequency range 698-2700 MHZ
A52-V32-100, Wideband Panel Antenna, frequency range 698-2700 MHZ


Buy Now

Find out where you can buy a Cel-Fi GO in your region.