Cel-Fi QUATRA 2000

Dual-Carrier Hybrid Active DAS for 3G/4G/5G Voice and Data.

Only available in North America

QUATRA 2000 Awards

About QUATRA 2000

Spotty cellular coverage, poor voice quality, dropped calls, and dead zones continue to plague employees and visitors in middleprise buildings. To solve that problem, Cel-Fi QUATRA 2000 is an affordable, all-digital active DAS hybrid solution that provides uniform, high quality cellular signal throughout any building. This industry-leading system is also carrier approved and guaranteed network safe.

Unlike older analog boosters and passive DAS technology, Cel-Fi QUATRA delivers a cellular signal that is up to 1000x stronger. The system utilizes Cat5e cabling for RF and Power over Ethernet, with no signal attenuation right to the perimeter of the building. In addition to being the most powerful solution on the market, QUATRA is cost-effective and designed to be installed within days (compared to months typical of other solutions).

Up to 100 dB Max Gain
for 3G/4G/5G Voice and Data
All Digital
Cat5e PoE/RFoE Solution
Scalable Up to 50,000 ft2
Coverage per Network Unit
Network Safe and Carrier-Approved
with No Noise Guaranty
Remote Monitoring and
Management via WAVE Platform

QUATRA 2000 Components

QUATRA 2000 Network Unit (NU)

The QUATRA Network Unit (NU) is the hub of the system. The scalable design works with one to four Coverage Units to provide up to 50,000 ft2 (5,000 m2) of coverage.

The QUATRA NU:

  • Provides a donor signal to the QUATRA system
  • Provides power to the Coverage Units (up to four)
  • Connects to the Cel-Fi WAVE cloud platform for remote monitoring and management
  • QUATRA 2000 supports a dual carriers

Model Number:
_ › Q34-4/5/12/13/25NU_EXA

QUATRA 2000 Coverage Unit (CU)

The Cel-Fi QUATRA Coverage Unit (CU) is the remote unit of the system that rebroadcasts the donor signal. The cost efficient and easy-to-deploy system leverages Power-Over-Ethernet (POE) for up to four CUs.

The QUATRA CU:

  • Provides coverage for the QUATRA system (up to four per Network Unit)
  • Power is delivered by Power-Over-Ethernet from the Network Unit
  • Self-configuring and self-optimizing
  • Note: QUATRA 2000 CU’s are only compatible with QUATRA 2000 NU’s

Model Number:
_ › Q34-4/5/12/13/25CU_EXA

WAVE Portal

The Cel-Fi WAVE Portal is a cloud-based, remote management platform, that allows users/operators to manage and maintenance Cel-Fi systems. The platform is mobile friendly which facilitates ease of use on site. Alerts and alarms can be used as configured out of the box or they can be customized however the owner or admin chooses.

The Cel-Fi WAVE Portal Features of the platform include:

  • Cel-Fi device and asset management
  • Data modeling and reporting
  • Mobile and computer applications
  • Globally trusted carrier-grade security
  • Users can access the WAVE Portal through the web interface, or integrate it via API’s.

Accessories for the QUATRA 2000

QUATRA Range Extender

The Cel-Fi QUATRA Range Extender (QRE) is a Power over Ethernet (PoE) device that extends the maximum distance between the Cel-Fi QUATRA Network Unit and the Coverage Unit.

QUATRA Fiber Range Extender

The QUATRA Fiber Range Extender increases the distance between the Network Unit and the Coverage Unit up to 2 kilometers.

Recommended Antennas

LPDA-R Antenna

The Cel-Fi LPDA-R Antenna offers a powerful 12 to 14 dBi gain (depending on carrier frequency) over 617–4000 MHz and is designed to reduce out of band noise, to improve SiNR and overall signal quality. Simple mounting with included U-Bolts.

Indoor Omni Dome Antenna

The Cel-Fi Indoor Omni Antenna receives and transmits signal in a 360° pattern and are compatible with the 698 – 2700 MHz frequency ranges that include 3G and 4G signals.

Tech Specs

Configurations

Model Number Bands Supported Carrier Configurations Available
Q34-4/5/12/13/25 4, 5, 12, 13, 25 AT&T & Verizon
T-Mobile & Sprint
Certifications

FCC, CE_RED, ISED, cETL, ETL, CE, ICASA, SRRC, NAL, RCM, and EAC
Declarations of Conformity

Power (NU only)

54 VDC @ 2.22 Amp via external supply (51.3 to 56.7 VDC tolerance)
External supply: 100 to 240 VAC, 47 – 63 Hz
Power consumption less than 120W max
Network Unit provides power to Coverage Units over Cat 5e (PoE)

Environmental

Operating temperature: 0° to 40°C
Storage temperature: -25° to 60°C
Convection Cooling
Relative humidity: 0% to 95%, noncondensing

External Ports

4x CU RJ45 Proprietary Gigabit link
100m max CU cable length Cat5e, or 150 m with 23AWG CAT6/7
Up to 300m max CU cable length with Cel-Fi QUATRA Renge Extender and 23AWG CAT6/7 PoE IEEE 802.3at
RJ45 LAN management port (10/100 Fast Ethernet)
RJ45 LAN management output port (10/100 Fast Ethernet)
2x External RF Input (QMA Female 50 ohm)

Downloads

Buy Now

Find out where you can buy a Cel-Fi QUATRA in your region.

Get Support

Have any questions about your QUATRA 1000? Start here…

Menu